Chromatography Systems
MilliporeSigma™ MilliSolve Kit
The Millipore MilliSolve Filtration System has been designed for the filtration of liquid chromatography buffers and solvents under vacuum.
MilliporeSigma™ Supelco™ Rheodyne™ Model 3725i Preparative Sample Injector
Manual, Number of ports: 6 and Number of positions: 2
MilliporeSigma™ Supelco™ Fritless Purge Sampler Glassware
For use with Tekmar™ 2000/3000 & Velocity XPT Concentrators
MilliporeSigma™ Supelco™ PEEK Inline Microfilter
Install between 2 pieces of capillary tubing, using Microtight tubing sleeves. PEEK housing with special PEEK fitting that encases the 0.5 μm PEEK frit. Through hole 0.006 in., swept volume 0.24 μL. Includes 2 MicroFingertight nuts, and 5 frits (1 installed).
MilliporeSigma™ Supelco™ Rheodyne™ Rotor Seal for Model 7125/7725/7725i Injector
Rotor Seal for Model 7125/7725/7725i Injector is an accessory for use with mainly Rheodyne™ model 7725 and 7725i injectors for operation at pH 0-14.
MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold Starter kit
The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.
MilliporeSigma™ Supelco™ radiello™ BTEX Calibration Kit (Thermal Desorption)
The BTEX Calibration Kit (thermal desorption) was designed for the analysis of BTEX in urban environments followed by thermal desorption.
Thermo Scientific™ Rheodyne™ 7725 and 7725i Sample Injectors
Ensure accurate, precise HPLC injections and protect against pressure shock with the dual-mode Thermo Scientific™ Rheodyne™ 7725 and 7725i Sample Injectors.
MilliporeSigma™ Supelco™ Micro-Metering Valve (Low Pressure)
Designed for the control of fluid flow rates
MilliporeSigma™ Supelco™ Mobile Phase Reservoir System
This convenient system is made entirely of inert parts: glass, Tefzel, PEEK, and PTFE TFE. Includes 10 ft./3 m of 1/8 in. O.D. PTFE tubing, a PEEK bottom-of-the-bottle filter/sparger, a plug, and a 1-liter or 2-liter safety-coated bottle.
MilliporeSigma™ Supelco™ Capillary Column Tags
For permanently labelling capillary columns
MilliporeSigma™ Supelco™ Syringe Adapter and Accessories
Analytical Standard Grade
MilliporeSigma™ Supelco™ Miniature Regulator with Gauge
Reliable pressure regulation to 1 psig (0.07 kg/cm2), indicated on a 0-60 psi (4.2 kg/cm2) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm2).